50P Series Lab Filter
The Model 50P lab filter is for filterability and scale up studies. Each of these units is constructed of polycarbonate for filtration up to 30 PSIG. ErtelAlsop Cylinder-Type Laboratory Filters are available with capacities for polish and cake filtration.
The Model 50P provides 50 cm² of filtration area and 270 ml of volume. It is light and perfect for transporting. The cylinder is available in both 25 mm and 50 mm heights to allow for different cake heights.
It is ideally suited for use with a peristaltic pump and liquids that require the use of filter aid, such as Celpure® Diatomaceous Earth, to provide the required clarity of the finished product.
The 50P lab filter is also available in the Application Optimization Kit which is an ideal filtration solution for any lab testing setup.
Standard Features
- Pressure Gauge
- O-Ring Cylinder/Media Gaskets
- Leurloc Inlet/Outlet Connections
- 50 mm Deep Cylinder
- 3 Stainless Steel Tie Rods
- Stainless Steel Media Support Screen
- 3 Stainless Steel Legs
- Complete Portability
Applications
- Research & Development
- Quality Assurance
- Laboratory Testing
50P Lab Filter Specifications
- Material: Polycarbonate
- Gasket Material: Silicone
- Pressure Limit: 30 PSI
- Jacket Pressure: N/A
- Media Type: Any Flat
- Media Diameter: 3.46 in (88 mm)
- Filter Area: 7.75 in2 (50 cm2)
- Volume: 16 in3 (270 ml)
- Gauge: Standard
Spec Sheets
Product Specifications
| Material | Polycarbonate |
|---|---|
| Gasket Material | Silicone |
| Pressure Limit | 30 PSI |
| Jacket Pressure | N/A |
| Media Type | Any Flat |
| Media Diameter | 3.46 in (88 mm) |
| Filter Area | 7.75 in2 (50 cm2) |
| Volume | 16 in3 (270 ml) |
| Gauge | Standard |