Product Description
Strainrite Pur-PLEAT & Poly-MAXX absolute-rated polypropylene depth cartridges are designed to optimize throughput while providing repeatable effluent quality. They support recirculating liquids, DI/RO prefiltration, general water filtration, wastewater, and reagent-grade chemical applications.
Continuous microfiber-blown media, thermally bonded construction, and optimized pleat geometry help deliver low pressure drop, high flow rates, and reliable particle retention. The all-polypropylene cartridge construction provides broad chemical compatibility, while thermal bonding eliminates particle bypass.
Available in 1 to 70 micron ratings and 5 to 40 in lengths, Pur-PLEAT and Poly-MAXX cartridges accommodate several end-cap and gasket configurations. The Poly-MAXX Special Pleat option is available in 1, 1.5, and 2.5 micron ratings, with expected surface-area improvement of up to 25%.
Features
- Absolute-rated media for reliable, repeatable filtration
- Continuous microfiber-blown polypropylene media
- Thermally bonded construction to eliminate particle bypass
- Low pressure drop for higher flow rates and reduced processing time
- All-polypropylene construction for broad chemical compatibility
- Multiple lengths, end caps, seals, and cartridge grades
- Poly-MAXX Special Pleat option for select fine-micron ratings
- Meets USP Class VI and FDA food-contact requirements per 21 CFR 177.1520
Technical Specifications
- Retention Ratings: 1, 1.5, 2.5, 5, 10, 15, 20, 40, 70 micron; ASTM F795-98
- Outside Diameter: Pur-PLEAT: 2.5 in (64 mm); Poly-MAXX: 2.7 in (68.5 mm)
- Lengths: 5, 10, 20, 30, 40 in
- Filter Media: Polypropylene microfiber
- Pleat Support, Core, End Caps: Polypropylene
- Construction: Thermally bonded
- Gaskets/O-Rings: Silicone, Buna-N, fluorocarbon, EPDM, PTFE foam, PTFE hard, FEP-encapsulated fluorocarbon, FEP-encapsulated silicone
- Maximum Operating Temperature: 180°F (82°C), continuous duty
- Maximum Differential Pressure: 75 psid (5.1 bar) at 75°F (24°C); 40 psid (2.7 bar) at 180°F (82°C)
- Special Pleat: Poly-MAXX only; 1, 1.5, and 2.5 micron ratings
Applications
Suitable for particle removal in:
- Recirculating liquids
- DI/RO prefiltration
- Wastewater
- General water filtration
- Reagent-grade chemicals
Specifications
| Rating Type | Absolute-rated, ASTM F795-98 retention rating |
|---|---|
| Micron Ratings | 1, 1.5, 2.5, 5, 10, 15, 20, 40, 70 micron |
| Filter Media | Polypropylene microfiber |
| Pleat Support Material | Polypropylene |
| Core | Polypropylene |
| End Caps | Polypropylene |
| Construction Method | Thermally bonded |
| Outside Diameter | Pur-PLEAT: 2.5 in (64 mm), Poly-MAXX: 2.7 in (68.5 mm) |
| Lengths | 5 in (12.7 cm), 10 in (25.4 cm), 20 in (50.8 cm), 30 in (76.2 cm), 40 in (102 cm) |
| Gaskets/O-Rings | Silicone, Buna-N, fluorocarbon, EPDM, PTFE foam, PTFE hard, FEP-encapsulated fluorocarbon, FEP-encapsulated silicone |
| Maximum Operating Temperature | 180°F (82°C) continuous duty |
| Maximum Differential Pressure | 75 psid (5.1 bar) at 75°F (24°C), 40 psid (2.7 bar) at 180°F (82°C) |
| End Configurations | C1 Double Open End, C2 213/Recessed Cup, C3 Flat/222, C4 Single Open End/Flat, C5 Recessed Cup/222, C6 Flat/226, C7 Fin/226, C8 Fin/222 |
| Cartridge Grade | General, FDA Grade, Pharmaceutical, Water |
| Cartridge Options | 316 stainless steel insert, DI Flush |
| Special Pleat Option | Poly-MAXX only; 1, 1.5, 2.5 micron; expected surface-area improvement up to 25% |
| Compliance | USP Class VI, FDA food-contact requirements per 21 CFR 177.1520 |