Product Description
The MADD-MAXX XL is a polypropylene felt filter element that combines depth filtration with a pleated, high-surface-area design. Select micron ratings from 1 to 200 micron support a range of liquid filtration requirements.
Compared with small-diameter elements, the MADD-MAXX XL provides 5 to 10 times more surface area, depending on the selected configuration and materials. This increased area supports higher flow capacity, lower initial differential pressure and longer element life.
Polypropylene filter media, hardware, support material and cage provide broad process compatibility. Thermally bonded end caps help prevent bypass, while a single O-ring sealing flange provides a positive seal.
Features
- Polypropylene felt depth-filter media
- Eight micron ratings from 1 to 200 micron
- Increased surface area for higher flow capacity
- Lower initial differential pressure
- Single O-ring sealing flange
- Thermally bonded end caps to help prevent bypass
- Internal polymeric separator for full pleat utilization
- Polypropylene hardware, support material and cage
Technical Specifications
- Micron ratings: 1, 5, 10, 25, 50, 75, 100 and 200 micron
- Cartridge lengths: P1 – 12 in; P2 – 30 in; P3 – 42 in; P4 – 60 in
- Filter media: Polypropylene felt
- Hardware: Polypropylene
- Support material: Polypropylene
- Cage: Polypropylene
- Construction: Thermally bonded
- O-ring materials: Buna-N, fluorocarbon (FKM) and silicone
- Maximum operating temperature: 180°F (82°C), continuous duty
- Maximum differential pressure: 35 psid at 75°F
- Seal: Single O-ring sealing flange
Applications
MADD-MAXX XL elements are documented for:
- Food and beverage processing
- DI/RO prefiltration
- Edible oil filtration
- Reagent-grade chemicals
- General water filtration
- Wastewater filtration
- Amine fluids
- Glycol fluids
Specifications
| Product Type | Polypropylene Felt Hybrid Depth Filter Element |
|---|---|
| Micron Ratings | 1, 5, 10, 25, 50, 75, 100, 200 micron |
| Cartridge Lengths | P1 - 12 in, P2 - 30 in, P3 - 42 in, P4 - 60 in |
| Filter Media | Polypropylene Felt |
| Hardware | Polypropylene |
| Support Material | Polypropylene |
| Cage | Polypropylene |
| Construction Method | Thermal Bond |
| Seal Design | Single O-Ring Sealing Flange |
| O-Ring Materials | Buna-N, Fluorocarbon (FKM), Silicone |
| Maximum Operating Temperature | 180°F (82°C), Continuous Duty |
| Maximum Differential Pressure | 35 psid at 75°F |