Product Description
The MAXX-Pro filter cartridge is a high-efficiency, large-diameter liquid filtration element designed for applications requiring high contaminant removal. Its outside-in flow path, 6.5-inch diameter, pleated polypropylene microfiber media, and 226 O-ring connection provide high flow capacity with comparatively low flow resistance.
Extensive surface area and variable pleat geometry support high dirt-holding capacity and consistent particle retention. Thermally bonded construction, an injection-molded cage, and available O-ring materials support use with amines, hydrocarbons, chemicals, fuels, and process water streams.
Features
- Micron ratings from 1 to 70 micron
- 90% rated filter media
- Large-diameter pleat configuration for high flow rates
- High dirt-holding capacity from extensive surface area
- Variable pleat geometry maximizes usable filtration area
- Outside-in flow direction
- Injection-molded polypropylene cage
- Thermally bonded construction
- 226 O-ring connection designed to reduce bypass risk
- Integral handle for easier removal
Technical Specifications
- Micron ratings: 1, 2, 5, 10, 15, 25, 40, and 70 micron
- Rating: 90%
- Nominal outside diameter: 6.5 in (16.5 cm)
- Nominal lengths: 40 in and 60 in
- Filter media: Polypropylene microfiber
- Support materials: Polypropylene and polyester
- End caps: Polypropylene
- Molded cage: Polypropylene
- Flow direction: Outside-in
- Maximum operating temperature: 180°F (82°C), continuous duty
- Maximum flow rate: 60 gpm for the 40 in element
- Recommended change-out: 35 psid
- Connection: 226 O-ring
- O-ring options: Buna-N, fluorocarbon, EPDM, silicone, and FEP-encapsulated silicone
Applications
MAXX-Pro cartridges are documented for liquid filtration in:
- Amines
- Hydrocarbons and pipeline fuels
- Chemical plants
- Process water
- Wastewater
- Utility water
- Cooling water
Specifications
| Micron Ratings | 1, 2, 5, 10, 15, 25, 40, 70 micron |
|---|---|
| Rating Type | 90% rated |
| Flow Direction | Outside-in |
| Nominal Outside Diameter | 6.5 in (16.5 cm) |
| Lengths | 40 in, 60 in |
| Filter Media | Polypropylene microfiber |
| Support Materials | Polypropylene, polyester |
| End Caps | Polypropylene |
| Molded Cage | Polypropylene |
| Construction Method | Thermal bond |
| O-Rings | Buna-N, fluorocarbon, EPDM, silicone, FEP-encapsulated silicone |
| Maximum Operating Temperature | 180°F (82°C), continuous duty |
| Maximum Flow Rate | 60 gpm for 40 in element |
| Recommended Change-Out | 35 psid differential pressure |
| End Connection | 226 O-ring |