CLEAR Solutions’ NanoCLEAR series pleated filter cartridge features a thermally bonded blend of microglass fibers & cellulose infused with nanoalumina fibers in a non-woven matrix that creates an electropositive depth filter media. When assembled into a pleated cartridge, NanoCLEAR offers a unique combination of efficiency, capacity, flow rate & low pressure drop at levels unmatched in today’s filtration marketplace. In addition, all NanoCLEAR filter cartridges are assembled using only FDA-compliant materials.
This cartridge has been designed to satisfy the most difficult requirements in water treatment. By using the scientific principle of electropositive attraction/ capture, NanoCLEAR NASA-derived technology leads to a rapid and highly efficient adsorption of virtually all particle sizes. NanoCLEAR media has a high capacity for particles as large as tens of microns or as small as a few nanometers. Each NanoCLEAR filter cartridge exhibits a rating of 0.2µ – a rating typically associated with microporous membranes. Yet NanoCLEAR flow rates are hundreds of times greater than such membranes.
Part No. | NC-SS-5 | NC-SS-10 | NC-SS-20 | NC-SS-30 | NC-SS-40 | NC-SL-10 | NC-SL-20 | NC-SL-40 | |
---|---|---|---|---|---|---|---|---|---|
Surface Area | ft2 (m2) | 1.4 0.13 | 3.4 0.32 | 7.1 0.66 | 10.6 0.99 | 14.1 1.31 | 8.3 0.77 | 17.0 1.58 | 35.0 3.25 |
Micron Rating | µ | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 |
Dirt Holding Capacity | grams | 114.4 | 280.3 | 583.4 | 875.2 | 1161.2 | 683.5 | 1401.4 | 2882.9 |
Dimensions (ODA x Length) | in (cm) | 2.8 x 4.85 7.1 x 12.32 | 2.8 x 9.75 7.1 x 24.77 | 2.8 x 20 7.1 x 50.8 | 2.8 x 30 7 x 76.2 | 2.8 x 40 7 x 101.6 | 4.5 x 9.75 11.43 x 24.77 | 4.5 x 20 11.43 x 50.8 | 4.5 x 40 11.43 x 101.6 |
Suggested Flow Rate | gpm (lpm) | 2 7.5 | 4 15 | 8 30 | 12 45 | 16 60 | 10 38 | 20 76 | 40 152 |
Maximum Flow Rate | gpm (lpm) | 5 19 | 10 38 | 20 76 | 30 114 | 40 151 | 25 95 | 50 133 | 100 380 |