NC-SL-20 NanoCLEAR Filter
NC-SL-20 NanoCLEAR Filter
CLEAR Solutions’ NC-SL-20 NanoCLEAR series pleated filter cartridge features a thermally bonded blend of microglass fibers & cellulose infused with nanoalumina fibers in a non-woven matrix that creates an electropositive depth filter media. When assembled into a pleated cartridge, NanoCLEAR offers a unique combination of efficiency, capacity, flow rate & low pressure drop at levels unmatched in today’s filtration marketplace. In addition, all NanoCLEAR filter cartridges are assembled using only FDA-compliant materials.
This cartridge has been designed to satisfy the most difficult requirements in water treatment. By using the scientific principle of electropositive attraction/ capture, NanoCLEAR NASA-derived technology leads to a rapid and highly efficient adsorption of virtually all particle sizes. NanoCLEAR media has a high capacity for particles as large as tens of microns or as small as a few nanometers. Each NanoCLEAR filter cartridge exhibits a rating of 0.2µ – a rating typically associated with microporous membranes. Yet NanoCLEAR flow rates are hundreds of times greater than such membranes.
Case Quantities
- NC-SL-20 (Single)
- NC-SL-20 (6 Pack)
Features
- Effective at high pH and in the presence of salt
- Pleated construction yields high flow rates
- Available in all standard end configurations
- Provides optical clarification to fluids
- Manufactured with strict quality control
- All components are manufactured with materials that meet FDA requirements 21CFR177.1520 for direct food contact applications.
Retention Characteristics
- Silt Density Index (SDI) < 0.5
- >99.99% Efficiency at 0.2 microns (latex spheres)
- >4 LRV Cyst Retention
- >5 LRV Klebsiella terrigena Retention
- <0.01 NTU until Terminal ∆P: 35 psid (2.4 bar)
- Dirt Holding Capacity: 82 g/ft2
Markets
- Food, Beverage & Bottled Water
- Pharmaceutical & Biomedical
- Cosmetics & Personal Care
- MicroElectronics
- Power Generation
- Potable Water (POE, POU, Municipal, Personal)
Applications
- Primary Filtration in lieu of microporous membranes
- Make Up Water (particulate, microbial control)
- Polishing Filters (carbon fines, emulsified oil removal)
- RO Prefiltration (SDI reduction)
- Process Water (turbidity, particulate, colloidal suspensions)
- Waste Water (biologicals, proteins, dyes)
- Cooling Towers, Chill Water Loops (iron removal)
Product Specifications
| Surface Area | 17.0 ft2 (1.58 m2) |
|---|---|
| Micron Rating | 0.2µ |
| Dirt Holding Capacity | 1401.4 grams |
| Dimensions | 4.5 x 20 in (11.43 x 50.8 cm) |
| Suggested Flow Rate | 20 gpm (76 lpm) |
| Max Flow Rate | 50 gpm (133 lpm) |