// infinite-with-sticky-navigation infinite-sticky-navigation

OFSV90F-1.3EXT-UP

Request a Free Quote
Description
Downloads

OFSV90F-1.3EXT-UP

90° 1/2 – 3/4″ Ferrule, 1 1/8″ Stem, Upward Flow A frequent requirement of manufacturing processes, quality control, or laboratory research is to acquire small samples of a liquid intermediate product or finished product at periodic intervals. Doing this in a way which is unobtrusive and does not compromise the integrity of the sample or the manufacturing process is problematic. A device known as a sample valve (or sampling valve) addresses this need. Sample valves are commonly found in industries such as Chemical and Plastics manufacturing, Food, Pharmaceutical, Cosmetics, and Water Treatment.

Sanitary Sample Valve Information


All valves are made from 316L Stainless-Steel, which creates a more sanitary, wear-resistant, contamination-resistant and easily cleaned product. All valve bodies are machined from solid bar stock, and the designs offer a full range of valve variations to accommodate your specific flow-direction requirements. Sampling stems come in two lengths to assist in all of your sampling processes. This variation in stem length allows you to pull your samples directly from the process flow in smaller and larger diameter piping, where the sample is at its most pure state and is less susceptible to contamination. These valves will allow you to safely and easily extract samples for analysis. Opening or closing valves has never been easier. The Delrin® knobs are cool to the touch—even with superheated fluids—and aid in tightening because of the positive tension between the plastic and stainless threads. This provides a complete seal with just a finger-tight turn. You can immediately feel the precision closure that completely shuts off the flow—you know it’s tight. And there’s never any leaking, seepage, or mess, even after years of use.

More Details


  • 316L SS construction machined to less than 20 Ra.
  • Pressure Rating: 300 PSI at 200˚F & 400 PSI @ 100˚F.
  • Optional 90˚ or Inline models with 1/2”, 3/4”, 1”, 1 1/2” and 2” Ferrule, 1/4” NPT or weld body.
  • 3/8” Diameter Hose Barb product discharge.
  • Minimized dead space for possible contamination.
  • Limited stem travel for safety.
  • FDA Silicone O-Ring standard with optional materials available.
  • Solid Delrin® knob standard with 17-4 SS knob insert optional.
  • Spare Parts and Repair/Maintenance Kits are available. SV&E valves are easily unassembled to be cleaned or maintained.
  • Can be autoclaved assembled or unassembled.
  • All valves are individually packaged and labeled.
  • Certificate of Compliance and Material Certs are provided with each order.
  • Electropolishing and O2 Cleaning with clean room packaging can be provided upon request.

Product Spec Sheets